NID-01VTJ 4G NID Splitter with Test Jack
The NID-01VTJ is a full VDSL2 POTS Splitter, compatible up to 30MHz, backward compatible to ADSL2+ and ADSL. With a potted cavity and gel filled IDC connectors, this splitter is suitable for all applications, from the NID outside the house to inside wiring closets in apartments.
The NID-01VTJ is designed for simple and easy clip-in installation in virtually all industry standard NIDs, allowing for the continued use of existing infrastructure while upgrading to VDSL2 standards.
The Splitter is environmentally sealed against the elements. This, in cooperation with the gel filled IDCs, protects against the risk of corrosion or failure caused by nicked wires during stripping. A RJ-11 test jack is provided to validate dial tone on the primary phone line.
- Easy Clip‐in installation to standard NID / SNI boxes
- Make before break RJ-11 connector to verify line dial tone
- Compatible with HPNA v 3.1 home networking
- Environmentally Sealed for outdoor applications
- Secondary lightning/surge suppression
- Stable over the varying voltages from transient events
|Dimensions||50.3mm(H) x 23.4mm(W) x 76.2mm(D)
1.98” x 0.92” x 3.00”
|Operating Temperature||-40 to +65 °C
-40 to 149 °F
|Communications interface||Connects to the xDSL, POTS service using gel-filled Insulation Displacement Connectors (IDCs). Local loop via twisted pair wire.|
|Capacity||1 Subscriber loop per line unit|
|Compliance||T1.413, T1.424, ITU-T G.992.1, G.992.3, G.992.5, G.993.1 & G.993.2, CSA/UL 60950, FCC part 68,CS03, GR1089 (Level 1 & 2 Surges and Power Fault),GR 3167|